Kyocera KM-3650W Operation Manual page 39

5.2.3.1 Size Format
Press the L1 Key repeatedly for a size format of "DIN", "ENG" or "ARCH".
Press the Enter Key to apply the setting.
5.2.3.2 Recopy
The permission for Recopy can be specified.
Press the L2 Key repeatedly for a desired setting.
"Disable" forbids Recopy completely.
"Enable" permits Recopy.
"Passwd" requires a password entry for Recopy.
Press the Enter Key to apply the setting.
5.2.3.3 Auto Start
The scanner starts carrying an original after a slight interval.
To adjust the interval, press the R1 Key repeatedly for a desired setting.
"OFF" requires pressing the Start Key each time to start carrying originals.
Press the Enter Key to apply the setting.
5.2.3.4 Reset Timer
KM-3650w clears all the settings in the screen when a specified period has been passed
without any operation.
To adjust the period, press the R2 Key repeatedly for a desired setting.
"OFF" disables KM-3650w from clearing the settings.
Press the Enter Key to apply the setting.
5.2.3.5 Warm Sleep
KM-3650w goes into warm sleep when a specified period has been passed without any
operation.
To adjust the period, press the R3 Key repeatedly for a desired setting.
Press the Enter Key to apply the setting.
5.2.3.6 Power Save
KM-3650w goes into power save when a specified period has been passed without any
operation.
To adjust the period, press the R4 Key repeatedly for a desired setting.
Press the Enter Key to apply the setting.
38