Setting Mp Tray Paper Size - Kyocera FS-2000D Advanced Operation Manual

Setting MP Tray Paper Size

ADVANCED OPERATION GUIDE
When you use the MP tray in cassette mode, you should set the MP tray
size to the paper size that is used to format the job to print. If the sizes do
not match, printing will not be performed on the correct size paper. The
default setting is Letter size for the U.S. and Canada and A4 for other
countries. For more information about the paper sizes that you can feed
from the MP tray, refer to Paper Specifications on page 1-2.
NOTE:
Feeding the paper having a paper size which does not match the
current paper size from the MP tray can cause paper jam.
1
Press [Menu].
Press ? or @ repeatedly until Paper
2
Handling > appears.
Press B.
3
Press ? or @ repeatedly until >MP Tray
4
Size appears. In this example, the current
MP tray paper size is A4.
5 To change the paper size, press [OK]. A blinking question mark (?)
appears.
6 Press ? or @ to display the desired paper size. The message display
toggles through the following paper sizes:
Letter
Legal
Custom
Oficio II
Statement
Folio
Youkei 2
Youkei 4
16K
Hagaki
OufukuHagaki
Env. Monarch
Envelope #10
Envelope #9
Envelope #6
Envelope DL
Envelope C5
A6
B6
A5
B5
Using the Operation Panel
Paper Handling >
>MP Tray Size
A4
2-65