Page Protect Mode - Kyocera FS-2000D Advanced Operation Manual

Using the Operation Panel

Page Protect Mode

2-46
1 Press [Menu].
Press ? or @ repeatedly until Page Set >
2
appears.
Press B.
3
4 Press ? or @ repeatedly until
>Orientation appears.
5 Press [OK]. A blinking question mark (?)
appears.
Select Portrait or Landscape using ? or @.
6
7
Press [OK].
8
Press [Menu]. The display returns to Ready.
The Page Protect Menu does not normally appear, however, Page
Protect will be forcibly set to On if a print overrun error occurs because
the print job is too complex. When this has happened, be sure to reset
Page Protect to Auto (default) in order to maintain the optimum use of
printer memory.
1 Press [Menu].
Press ? or @ repeatedly until Page set >
2
appears.
Press B.
3
Press ? or @ repeatedly until >Page
4
Protect appears.
5 Press [OK]. A blinking question mark (?)
appears.
Page Set
>Orientation
Portrait
>Orientation
? Portrait
Page set
>Page Protect
On
>Page Protect
? On
ADVANCED OPERATION GUIDE
>
>