Kyocera FS-2000D Advanced Operation Manual page 101

ADVANCED OPERATION GUIDE
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
7
When the paper type to be customized is displayed, press [OK].
Press B and proceed to Setting the Paper Weight.
8
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
1
Display the custom paper type (refer to Creating Custom Paper Type on
page 2-74) and press B.
Press ? or @ repeatedly until >>Paper
2
Weight appears.
3
Press [OK]. A blinking question mark (?)
appears.
Press ? or @ to display the desired paper thickness. The display changes
4
as shown below. For details of the default setting for each paper type, refer
to Paper Availability on page 1-2.
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
5
When the desired paper thickness is displayed, press [OK] and proceed to
Setting the Duplex Path on page 2-75.
Setting the Duplex Path
You can set whether or not to enable duplex printing as follows. The default
setting is Enable.
1
Display the custom paper type (refer to Creating Custom Paper Type on
page 2-74) and press B.
Using the Operation Panel
>>Paper Weight
Normal 2
>>Paper Weight
? Normal 2
2-75