Table of Contents
Advertisement
Handle front cover
Viewfinder slide assembly
3
Attach the handle front cover with the
bottom edge up.
To attach the viewfinder
at the top
To attach the viewfinder
at the bottom (factory
default)
4
Attach the viewfinder slide assembly,
reversing the steps of the removal
procedure.
Bolt with
hexagonal hole
Using the BKW-401 Viewfinder Rotation
Bracket
By fitting a BKW-401 Viewfinder Rotation
Bracket (not supplied), you can rotate the
viewfinder out of the way so that your right leg
does not hit the viewfinder while you are carrying
the camcorder.
For details, refer to the operation manual for the
BKW-401.
Detaching the eyepiece
Removing the eyepiece gives a clearer view of the
screen from further away. It is also easy to
remove dust from the viewfinder screen and
mirror when the eyepiece is detached.
1
Turn the eyepiece locking ring fully
counterclockwise, to align the red
marks on the locking ring and the
viewfinder barrel.
1
3
2
1Locking ring
2Locking ring match mark
3Match mark on the viewfinder barrel
2
Detach the eyepiece.
Match mark on end of eyepiece
Attaching the Viewfinder
29
Advertisement
Table of Contents
