Table of Contents
Advertisement
Changing the range of choice of shutter
mode and speed settings
You can reduce the time required to select the
shutter mode and speed by narrowing the choice
of settings in advance. This can be done by using
the SHT ENABLE page of the OPERATION
menu.
Note
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B150
Remote Control Unit is connected to the camcorder.
MENU ON/OFF switch
MENU knob
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SHT ENABLE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
022 SHT ENABLE
SHUTTER SLS
SHUTTER ECS
SHUTTER 1/100
SHUTTER 1/125
SHUTTER 1/250
SHUTTER 1/500
SHUTTER 1/1000
SHUTTER 1/2000
2
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
b on the left of the selected item changes to
z and z on the left of the setting changes to
?.
3
Turn the MENU knob until ON
appears, then press the MENU knob.
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
z on the left of the selected item changes to
b and ? on the left of the setting changes to
z.
To set another mode or speed, return to step
2.
Note that only the shutter speeds set to ON
can be selected with the SHUTTER selector.
4
To end the menu operation, set the
MENU ON/OFF switch to OFF or close
the cover of the menu operating section.
The menu disappears from the screen and the
display indicating the current status of the
camcorder appears along the top and bottom
of the viewfinder screen.
Setting the Electronic Shutter
49
Advertisement
Table of Contents
