Table of Contents
Advertisement
To delete a character
In step 3 of "Setting the shot ID" (see page 129),
move the x mark over DEL, and press the
MENU knob.
This deletes the character under the x mark in the
shot ID row.
To cancel deleting the character, move the x
mark over RET, and press the MENU knob.
To cancel changing shot ID
Before executing step 5 of "Setting the shot ID"
(see page 129), move the b mark over ESC, then
press the MENU knob or flick the CANCEL/
PRST/ESCAPE switch to ESCAPE.
Displaying the status
confirmation screens
You can confirm the settings or status of the
camcorder on the LCDs by displaying the
following four screen.
ABNORMAL <!> screen
This window allows you to confirm why the !
(warning) indicator lights in the viewfinder.
You can use the "!" LED page of the
OPERATION menu to set whether or not the !
(warning) indicator lights.
SYSTEM screen
This screen displays information such as the
system format and the type of input or output
signal.
FUNCTION screen
This screen displays the functions assigned to the
assignable switches, ON or OFF of ZEBRA, the
detection level, and other information.
AUDIO STATUS screen
This screen allows you to confirm the following
items related to audio.
• Setting condition of audio
• Setting condition of DF/NDF
• Type of front microphone
• Type of input signal to audio channels 1 to 4
• Input level of audio channels 1 to 4
You can use the SET STATUS page of the
OPERATION menu to set whether or not the
status confirmation screens are displayed.
130
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
To display the status confirmation
screens
You can use the CANCEL/PRST/ESCAPE
switch as the STATUS ON/SEL/OFF switch
when the MENU ON/OFF switch is set to OFF
(when the cover of the menu operating section is
closed, OFF is automatically selected).
To disable display of the status
confirmation screens
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SET STATUS page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the SET
STATUS page.
Item
Description
STATUS
Selects whether or not the
ABNORMAL
ABNORMAL window is
displayed (ON or OFF).
STATUS
Displays (ON) or hides
SYSTEM
(OFF) the SYSTEM menu.
STATUS
Selects whether or not the
FUNCTION
FUNCTION window is
displayed (ON or OFF).
STATUS
Selects whether or not the
AUDIO
STATUS AUDIO window is
displayed (ON or OFF).
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Advertisement
Table of Contents
