Sony HDW-800P Manual page 11

f AUTO W/B BAL (automatic white/
black balance adjustment) switch
Activates the automatic white/black balance
adjustment functions.
WHITE: Adjusts the white balance
automatically. If the WHITE BAL switch
(see page 12) is set to A or B, the white
balance setting is stored in the corresponding
memory. If the WHITE BAL switch is set to
PRST, the automatic white balance
adjustment function does not operate.
BLACK: Adjusts the black set and black balance
automatically.
g MIC (microphone) LEVEL control
Adjusts the input level of audio channels 1, 2, 3
and 4.
For details, see "Adjusting the Audio Level" on page
52.
Right side (near the front)
1 2 3 4
6 7 8 9
0
ON/
SEL
STATUS
OFF
5
qa qs
MENU
OFF CANCEL/PRST
ON ESCAPE
qd
qf
a ASSIGN (assignable) 1/2 switches
You can assign the desired functions to these
switches on the ASSIGNABLE SW page of the
OPERATION menu.
Nothing is assigned to these switches when the
camcorder is shipped from the factory (OFF is
selected in the menu).
For details, see "Assigning functions to ASSIGN
switches" on page 132.
b ASSIGN (assignable) 5 switch
You can assign the desired function to this switch
on the ASSIGNABLE SW page of the
OPERATION menu. The switch lights when
being pressed. Nothing is assigned to the switch
when the camcorder is shipped from the factory
(OFF is selected in the menu).
For details, see "Assigning functions to ASSIGN
switches" on page 132.
c ALARM (alarm tone volume
adjustment) knob
Controls the volume of the warning tone that is
output via the built-in speaker or optional
earphones. When the knob is turned to the
minimum position, no sound can be heard.
Minimum
d MONITOR (monitor volume
adjustment) knob
Controls the volume of the sound other than the
warning tone that is output via the built-in speaker
or optional earphones. When the knob is turned to
the minimum position, no sound can be heard.
e MONITOR (audio monitor selection)
switches
By means of combinations of the two switches,
you can select audio that you want to hear through
the built-in speaker or optional earphones.
Position of down-side switch: CH-1/2
Position of up-side Audio output
switch
CH-1/CH-3 Channel 1 audio
MIX Channels 1 and 2 mixed
audio (stereo)
CH-2/CH-4 Channel 2 audio
Locations and Functions of Parts and Controls
ALARM
Maximum
11