Adjustments And Settings From Menus; Setting Gain Values For The Gain Selector Positions; Selecting The Output Signals - Sony HDW-800P Manual

Adjustments and
Settings From Menus
Setting gain values for the GAIN
selector positions
You can set the gain values for the L, M, and H
positions of the GAIN selector, which switches
the gain of the video amplifier.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the GAIN SW page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the item for the switch position,
then press the MENU knob.
You can set the following items on the GAIN
SW page.
Item Description
GAIN Sets the gain value
LOW corresponding to the L position
of the GAIN selector.
GAIN MID Sets the gain value
corresponding to the M position
of the GAIN selector.
GAIN Sets the gain value
HIGH corresponding to the H position
of the GAIN selector.
GAIN Sets the gain value
TURBO corresponding to TURBO GAIN
function.
Item Description
TURBO OFF: When you operate the
SW IND GAIN selector after
pressing the button to which
the TURBO GAIN function
has been assigned once, the
video gain is changed
according to the GAIN
selector operation.
ON: When the video gain is
boosted to the video gain to
the value preset by pressing
the button to which the
TURBO GAIN function has
been assigned once, the
video gain is not changed
even if you operate the
GAIN selector, until you
press the button once more.
SHOCK- Turns shockless gain on or off.
LESS
GAIN
3
Turn the MENU knob to select the gain
value, and press MENU knob.
Any of –6, –3, 0, 3, 6, 9, 12, 18, 24, 30, 36 or
42 dB can be set for each of the L, M, H, and
TURBO positions, in any sequence.
4
Repeat steps 2 and 3 until you have set
all of the desired items.

Selecting the output signals

(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the OUTPUT 1 page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
OUTPUT 1 page.
Item Setting
HD SDI Selects the signal output from
OUT the HDSDI OUT connector.
OFF: Do not output video.
HDSDI: Output HDSDI.

Adjustments and Settings From Menus

131