Samsung FQ115T User Manual page 178

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since
they can scratch the surface, which may result in shattering of the glass.
Do not use your microwave oven to dry papers or clothes.
For your safety, do not use high-pressure water cleaners or steam jet cleaners.
cauTIon sIGns For cleanInG
cauTIon
The oven should be cleaned regularly and any food deposits removed.
Failure to maintain the oven in a clean condition could lead to deterioration of the surface that
could adversely affect the life of the appliance and possibly result in a hazardous situation.
Take care not to hurt yourself when cleaning the appliance (external/internal).
- You may hurt yourself on the sharp edges of the appliance.
Do not clean the appliance with a steam cleaner.
- This may result in corrosion.
precauTIons To avoId possIble eXposure To
eXcessIve mIcroWave enerGy
Failure to observe the following safety precautions may result in harmful exposure to
microwave energy.
(a) Under no circumstances should any attempt be made to operate the oven with the door open
or to tamper with the safety interlocks (door latches) or to insert anything into the safety interlock
holes.
(b) Do not place any object between the oven door and front face or allow food or cleaner residues
to accumulate on sealing surfaces. Ensure that the door and door sealing surfaces are kept
clean by wiping after use first with a damp cloth and then with a soft dry cloth.
(c) Do not operate the oven if it is damaged until it has been repaired by a qualified microwave
service technician trained by the manufacturer. It is particularly important that the oven door
closes properly and that there is no damage to the:
(1) Door (bent)
(2) Door hinges (broken or loose)
(3) door seals and sealing surfaces
(d) The oven should not be adjusted or repaired by anyone other than a properly qualified
microwave service technician trained by the manufacturer.
This product is a Group 2 Class B ISM equipment. The definition of group 2 which
contains all ISM equipment in which radio-frequency energy is intentionally generated
and/or used in the form of electromagnetic radiation for the treatment of material, and
EDM and arc welding equipment. For Class B equipment is equipment suitable for use
in domestic establishments and in establishments directly connected to a low voltage
power supply network which supplies buildings used for domestic purposes.
10_ safety information
FQ115T001_XEH-00226E_EN.indb 10 2010-03-19 9:05:53