Hardware - Mitsubishi Electric i-BX-N Technical Manual

TM_i-BX(-N)_NC05_00_06_20_EN
6

HARDWARE

The controller hardware consists of a μPC medium cod. C51100048E (UPCA001DM0) with the following characteristics:
uPC MEDIUM UPCA001DM0 CAREL
FLASH BIOS memory + application SW: 4MB
Revision 1.212
Power input: 230VAC
Integrated expansion valve driver: Yes
μPC medium I/O characteristics and arrangement:
Digital inputs Analogue Outputs
Total 10
Type
---
Dimensions:
MEHITS S.p.A. ● TECHNICAL MANUAL
Analogue Inputs
4
B1, 2, 3, 4, 6,7, 8, 9, 11,12
Low temperature NTC: 10 kΩ ± 0.1% a 25 °C, -50T90 °C
0-10V
High temperature NTC: 50 kΩ at 25 °C, 0T150 °C
B5, 10 pressure sensor (4...20 mA)
Legend:
1 Connector for terminal and application discharge
2 Connector for application discharge
3 PLD terminal connector
4 RS485/tLAN connection
5a Valve 1 control output
5b Valve 2 control output
6 Relay digital output
7 Digital input
8 Probe analogue input
9 Analogue output
10 Serial board
11 External probe power input
12 Power input: 230 Vac for UPCA version
13 LED
14 tLAN/RS485 jumper
12
63
Version NC05 - Translation of the Original Instructions
Digital outputs
12
---