Intel Xeon E3-1125C User Manual page 52

Signal I/O Default
Name Type Mode
3. For GPIOs where GPIO versus Native Mode is configured using SPI Soft Strap, the corresponding GPIO_USE_SEL bits for
these GPIOs have no effect. The GPIO_USE_SEL bits for these GPIOs may change to reflect the Soft-Strap configuration
even though GPIO Lockdown Enable (GLE) bit is set. For signals that have Native defaults, these signals must be configured
by using SPI Soft Strap.
4. The functionality that is multiplexed with the GPIO may not be used in desktop configuration.
5. In a ME disabled system, GPIO31 may be used as ACPRESENT from the EC.
® ®
Intel Xeon Processor E3-1125C with Intel
User Guide
52
Ball Default Power
Coun Direction Well
t and Logic
State
®
Communications Chipset 8910 Development Kit
Crystal Forest—Technical Reference
Internal/
External
Resistor Pull-
Up/Down
Description
October 2012
Order No.: 328009-001US