Intel Xeon E3-1125C User Manual page 29

CRB Setup—Crystal Forest
Note: The SPI can be damaged if programmed with a different algorithm. It is a
The Dediprog software is a free download from:
flash-in-circuit-programming/SF100
5. Click Erase to blank the SPI.
6. Use Blank to verify the SPI has been erased.
7. After the blank check has been completed without any problem, click File to locate
and open the file. If the suffix is .ROM, select Data Format: ROM. if the suffix
is .BIN, select Data Format: Raw Binary. Click OK.
You need to program chip 1 and chip 2. Repeat steps 5 through 7 for Chip 1 and
2, using the following files:
• Application Memory Chip 1:
• Application Memory Chip 2:
Note: See the File Descriptions section of the BIOS release notes to verify
October 2012
Order No.: 328009-001US
good practice to restart the program when a different board is used. Verify
that the "Application Memory Chip" is selected (SPI0, Application Memory
Chip1 or SPI1, Application Memory Chip2).
BIOS version and file names.
® ®
Intel Xeon Processor E3-1125C with Intel
http://www.dediprog.com/SPI-
Rom00_4M_ST.bin
Rom01_4M.bin
®
Communications Chipset 8910 Development Kit
User Guide
29