Learn about the printer
1
Staple finisher
Note: Not supported if another finisher is installed.
2
Optional 2 x 520-sheet tray
3
Staple, hole punch finisher
Note: Supported only if the optional trays or an optional spacer is installed.
4
Trifold/Z‑fold finisher
Note: Supported only if the optional trays or an optional spacer is installed.
5
Booklet finisher
Note: Supported only if the optional trays or an optional spacer is installed.
6
Optional 2000-sheet tandem tray
7
Optional 2000-sheet tray
8
Paper transport
Note: Supported only if the booklet finisher or staple, hole punch finisher is installed.
Using the control panel
Control panel part Function
1
Power button
2
Display
3
Indicator light
•
Turn on or turn off the printer.
Note: To turn off the printer, press and hold the power button for five seconds.
•
Set the printer to Sleep mode.
•
Wake the printer from Sleep or Hibernate mode.
•
View the printer messages and supply status.
•
Set up and operate the printer.
Check the status of the printer.
14