Table of Contents
Advertisement
•
If the task expires before the start time of a task that precedes it in the installation queue, iLO will not save the task.
•
If an update is not initiated within the specified time window, it expires. If the update expires, delete and then recreate
the task, or edit the task.
Editing a task in the installation queue
Prerequisites
•
The Configure iLO Settings privilege is required for editing tasks in the installation queue.
•
The Recovery Set privilege is required for making an optional update to the System Recovery Set after a queued
update is completed successfully.
•
If you want to use the Update Recovery Set feature, a System Recovery Set must exist and contain the component
you want to update.
The task you want to edit is in Pending status.
•
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click the Installation Queue tab.
2. Click
next to the task you want to edit.
iLO prompts you to update the task information.
3. To update the task name, enter a new name (up to 64 characters) in the Task name box.
4. Select a value in the Component or Command box.
•
If the original task is a component update, you can select only another component.
•
If the original task is a command, you can select only another command.
5. If the Wait command is selected, enter or update the wait time in the Wait time (seconds) box.
Valid values are from 1 to 3600 seconds.
6. (Optional) If you want to specify or edit the installation schedule, select or clear the Set schedule window check box.
a. If the Set schedule window check box is selected, select or update the method you want to use to define the
schedule.
Select Use maintenance window (default) to choose a maintenance window you configured on the
•
Maintenance Windows page.
To add a maintenance window, click New to navigate to the Maintenance Windows page. Create a
maintenance window, and then restart this procedure.
•
Select Specify time window to enter a schedule now.
b. Depending on the selected method, do one of the following:
If Use maintenance window is selected, select or change the value in the Maintenance window list.
•
If Specify time window is selected, add or update the schedule details.
•
7. (Optional) If you selected a component in step 4, and the component exists in the System Recovery Set, select or clear
the Update Recovery Set check box.
61
Using HPE iLO 5
Advertisement
Table of Contents
