Table of Contents
Advertisement
Specification
Rated input power (BTUs per hour)
Power supply output
Rated steady-state power
Maximum peak power
WARNING: To reduce the risk of electric shock, be sure that the cable grounding kit is properly installed and
connected to a suitable protective earth terminal before connecting the power source to the chassis.
WARNING: To reduce the risk of electric shock or energy hazards:
•
This equipment must be installed by trained service personnel.
•
Connect the equipment to a reliably grounded secondary circuit source. A secondary circuit has no direct
connection to a primary circuit and derives its power from a transformer, converter, or equivalent isolation
device.
CAUTION: This equipment is designed to permit the connection of the earthed conductor of the DC supply circuit
to the earthing conductor at the equipment.
If this connection is made, all the following must be met:
•
This equipment must be connected directly to the DC supply system earthing electrode conductor or to a
bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing electrode
conductor is connected.
•
This equipment must be located in the same immediate area (such as adjacent cabinets) as any other
equipment that has a connection between the earthed conductor of the same DC supply circuit and the earthing
conductor, and also the point of earthing of the DC system. The DC system must be earthed elsewhere.
•
The DC supply source is to be located within the same premises as the equipment.
•
Switching or disconnecting devices must not be in the earthed circuit conductor between the DC source and the
point of connection of the earthing electrode conductor.
Value
6337 at -48 VDC
6094 at -72 VDC
—
1500 W at -48 VDC to -60 VDC
1500 W at -48 VDC to -60 VDC
108
Specifications
Advertisement
Table of Contents
