Table of Contents
Advertisement
The NVMe firmware version will be displayed in the iLO web interface after the next server reboot.
•
Innovation Engine (IE) and Server Platform Services (SPS)—These firmware types require that you power off the
server before installation. The changes take effect after you power on the server.
Obtaining the iLO firmware image file
You can download the iLO firmware image file and use it to update a single server or multiple servers in a group.
The BIN file from the iLO Online Flash Component is required for updating the iLO firmware with the Flash Firmware or
Group Firmware Update features.
Procedure
1. Navigate to the following website: https://www.hpe.com/support/hpesc.
2. To locate and download the iLO Online Flash Component file, follow the onscreen instructions.
Download a Windows or Linux component.
3. Extract the BIN file.
•
For Windows components: Double-click the downloaded file, and then click the Extract button. Select a location for
the extracted files, and then click OK.
•
For Linux components: Depending on the file format, enter one of the following commands:
◦
#./<firmware_file_name>.scexe –unpack=/tmp/
◦
#rpm2cpio <firmware_file_name>.rpm | cpio -id
The name of the iLO firmware image file is similar to iLO 5_<yyy>.bin, where <yyy> represents the firmware
version.
Obtaining supported server firmware image files
Procedure
1. Navigate to the following website: https://www.hpe.com/support/hpesc.
2. To locate and download an Online Flash Component file, follow the onscreen instructions.
3. If you downloaded a Windows component:
a. Double-click the downloaded file, and then click the Extract button.
b. Select a location for the extracted files, and then click OK.
4. If you downloaded a Linux component:
a. For Linux components, depending on the file format, enter one of the following commands:
49
Using HPE iLO 5
Advertisement
Table of Contents
