Miele SmartLine Operating And Installation Instructions page 9


Before connecting the downdraft extractor to the mains supply,
ensure that the connection data on the data plate (voltage and
frequency) match the mains electricity supply. This data must
correspond in order to avoid the risk of damage to the downdraft
extractor.
Compare this data before connecting the appliance to the mains.
Consult a qualified electrician if in any doubt.

Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance (fire hazard). Do not use these to
connect the downdraft extractor to the mains electricity supply.

For safety reasons, this downdraft extractor may only be used
after it has been built in.

This downdraft extractor must not be installed and operated in
mobile installations (e.g. on a ship).

Any contact with live connections or tampering with the electrical
or mechanical components of the downdraft extractor will endanger
your safety and may lead to appliance malfunctions.
Only open the casing as described in the installation instructions and
in the "Cleaning and care" section of this booklet. Under no
circumstances should any other parts of the casing be opened.

The manufacturer's warranty will be invalidated if the downdraft
extractor is not repaired by a Miele authorised technician.

Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

The downdraft extractor is not intended for use with an external
timer switch or a remote control system.

If the plug is removed from the connection cable or if the cable is
supplied without a plug, the downdraft extractor must be connected
to the electrical supply by a suitably qualified electrician.
Warning and Safety instructions
9