Miele SmartLine Operating And Installation Instructions page 53

 Loosen the lug and pull the plug out.
 Loosen the strain relief screw  and
unlock the casing on both sides .
 Open the casing.
 Remove the stopper.
 Exchange the bridge  for the
connection cable of the switching
system.
 Close the casing.
 Tighten the strain relief screw.
 Reinsert the plug.
Connecting the e-box
 Connect the operating voltage and
fan control cables to the e-box and
the fan.
 Connect the control unit cable to the
e-box.
The socket positions are designed in
such a way that they cannot be mixed
up.
 Connect the downdraft extractor to
the mains.
 Check that the downdraft extractor
works.
Sealing the gaps
 Seal the gaps between the individual
SmartLine elements, and between the
flush-mounted SmartLine elements
and the worktop, with a silicone
sealant that is heat-resistant to at
least 160 °C.
Unsuitable sealant can damage
natural stone.
For natural stone worktops and
natural stone tiles, only use silicone
sealant that is specially formulated
for natural stone.
Please follow the manufacturer's
instructions.
Installation
53