Miele SmartLine Operating And Installation Instructions page 73

Length compensation – worktop
depth greater than 600 mm
 Divide the flat ducting into 2 pieces. 1
piece must correspond to the
difference between 600 mm and the
worktop depth.
 Insert the duct piece  into the
horizontal bend.
 Connect the duct piece  with the
short bend . Fix the connection
with the sealing strip.
 Adapt the remaining duct piece  to
the height of the base unit.
 Slide the length compensation 
over the adapted duct piece . Hold
the adapted duct piece  under the
short bend . Slide the length
compensation  over the short
bend  from below. Fix the
connection with the sealing strip.
Installing the fan motor
a Sealing strip
 Stick the sealing strip supplied to the
fan connection.
Installation
73