Installation - Surface-Mounted - Miele SmartLine Operating And Installation Instructions

Installation – surface-mounted
If the worktop is more than 24 mm
deep, it must be cut out underneath
on the building-in side on the right or
left hand side.
a Worktop
b Maximum 24 mm
c 12 mm
Securing the brackets
1 bracket (supplied with the spacer bar)
must be secured centrally to the right or
left-hand side of the cutout.
Wooden worktops
 Fit the bracket so that it sits flush
with the top edge of the worktop
cutout.
 Secure the bracket with the
3.5 x 25 mm wood screws supplied.
Natural stone worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
bracket.
 Stick the tape along the top edge of
the worktop cutout.
 Fit the bracket so that it sits flush
with the top edge of the worktop
cutout.
 Press the bracket firmly into position.
Installation
47