Paxar Monarch 9855 Application Notes page 20

The following table lists the Supply Menu options.
Option
Supply Type
Ribbon
Speed
Feed Mode
Backfeed
Print Position
Supply Position
Margin Position
Cut Position
Dispense Position
Backfeed Distance
Separators
Skip Index
Knife Control
Error Action
* Depends on the supply's feed length. Refer to the RFID Setup Guide & Supply Chart for
the Supply and Print Position settings.
3-2 Multi-Protocol Application Notes
Choices
Aperture/Die Cut/Black Mark/
Continuous/Tag Edge Aperture
No/Yes/High Energy
2.5/4.0/6.0/8.0/10.0/Default
Note: The printer pauses while
programming the RFID tag.
Continuous/On-Demand
Off/On/Extended
-450 to 450
-300 to 300
-99 to 99
-300 to 300
Note: The knife is not currently
supported for use with RFID
supplies.
50 to 200
10 to 200
No/Yes/Long
No/Yes
-20 to 20
Normal
Overstrike/Continue 1x to 5x
Note: If using "overstrike," do not
use Peel Mode.
Default Use for RFID
Die Cut Die Cut
Yes Any
Default Any
Continuous Any
Off Conditional*
0 Conditional*
0 Conditional*
0 Any
0 0 only
65 Conditional*
65 Conditional*
No Not recommended
No Not recommended
0 0 only
Normal Conditional*