Option
Read Tag
Write Retries
Signal Adjust
RF Power
Clear Data
Print Config
Protocol
When you turn on the RFID printer, "Monarch Initializing" flashes briefly
and then you see "Print Mode Ready." If an error occurs while the printer
is initializing, the error message flashes briefly on the display and then
you see "Print Mode Ready." The printer displays "Not available" when
you try to select the RFID menus if the module is inoperative.
The printer accepts RFID and non-RFID batches once you see "Print
Mode Ready."
2-2 Multi-Protocol Application Notes
Choices
NA
1-5
0-6
Read Power 1-25/
Write Power 1-25
Yes/No
Yes/No
C1Gen2
C1Gen1 96
C1Gen1 EPC64/96
EM4122
Default
NA
3
2
18
No
No
C1Gen2