Table of Contents
Advertisement
SMART I
NSTALLATION
SMART system: configuration
After the hardware is mounted and connected to power and source devices, the system needs
to be configured. Configuration includes:
•
Calibration/orientation
•
Display resolution
•
Display changes
•
Audio set up
•
System settings (language, date, time, etc.)
•
Power management set up
Calibration and orientation
Calibration and orientation are important to the proper functioning of a SMART interactive
display's touch features. Calibration and orientation ensure the touch interactions with the
display's surface are interpreted and communicated correctly with the SMART software
installed on the connected computer. Without calibration and orientation, digital ink could
appear at a distance from the pen's contact with the screen, or areas might not respond to
touch properly.
Calibration and orientation are required:
•
When the interactive display is installed
•
After the interactive display is moved
Calibration and orientation are recommended:
•
After an upgrade to the interactive display's firmware or the SMART software on the
connected computer
•
If the room's lighting changes (for example, brighter or dimmer bulbs are installed)
•
Touch features aren't working correctly
Refer to the product's installation or administrator's guides on
information about calibration and orientation. Note that the 7000 series interactive displays
require only orientation.
Resolution
Correct configuration of the product's display and resolution settings is important for ensuring
the best possible image quality. Methods of configuring the product's display vary with display
resolution and the capabilities of the source device.
55 smarttech.com/kb/171035
S
TANDARDS
support.smarttech.com
for
Advertisement
Table of Contents
