Table of Contents
Advertisement
SMART I
NSTALLATION
Handles
Safety locking
mechanism
Built-in equip-
ment and cable
management
Third-party options
Refer to
Appendix A: Third-Party Referrals
of equipment.
Mounting orientation
The electrical and mechanical components of SMART interactive products are designed to
work properly when the product is mounted in the orientation described in the product's
installation guide. Mounting the product in a different orientation can cause malfunctions and
will void the product's warranty.
There are a number of potential hazards of mounting SMART interactive displays in a non-
standard orientation:
•
Mounting an interactive display horizontally (like a table top) can cause the glass to sag,
damaging the display or interfering with the display's touch system.
•
Non-standard orientation can affect ventilation, creating hotpots in equipment, premature
failures, and in products that use projectors, exploding projector bulbs.
Mounting multiple displays
A multiple-display configuration can include two or more displays in a variety of arrangements.
SMART recommends that you mount no more than three interactive displays side by side.
If you mount multiple interactive displays side by side, install them as shown in the following
diagram. This setup helps to ensure the interactive displays' cameras and touch systems don't
interfere with each other.
20 smarttech.com/kb/171035
S
TANDARDS
Using a stand with handles will help prevent the application of pressure
directly to the interactive display during transport. Applying pressure to
the display's frame directly can twist the frame during transport.
Using a stand with locking wheels will ensure the
stays in place while it's in use.
Built-in equipment and cable management will help prevent damage to
components and connections during transport. Shelving and mounting
points are also useful for cable management.
on page 62 for a list of companies that sell this type
interactive display
Advertisement
Table of Contents
