The display module can now be slightly lifted
•
upwards and removed from the door panel.
To remove the button chain, lift the plastic slide
•
in the middle, and lift upwards to remove from
the side clips.
8.6 Removing the Door Latch
Remove the door panel, refer to section 8.4
•
Remove the 2 screws retaining the door lock to
•
the inner door panel.
Remove the harness to the door switch.
•
8.7 Removing the Dertergent Dispenser
Remove the outer door panel, refer section 8.4.
•
Remove the harnesses to the detergent dispenser.
•
Remove the 6 screws retaining the detergent
•
dispenser brackets.
The detergent dispenser will now be able to be
•
removed through the inner door panel from the
inside.
8.8 Removing the Flood Switch
Remove the product from the joinery.
•
Remove the base panel retaining screws. There
•
are 2 screws securing the flood switch to the
base panel.
Remove the wiring to the microswitch.
•
Remove the 2 hoses which are overflow tubes
•
from the front of the chassis.
The flood switch is now free to remove.
•
Reassemble in reverse order.
•
8 SERVICING THE COMPONENTS
D
D
31