Table of Contents
Advertisement
PROBLEM
Plastic items discoloured
(stained)
White stains left on dishes
Dishes/cutlery have not dried
Glasses have a dull appearance
Traces of rust marks on cutlery
Glasses clouded and
discoloured, milky coating
Water marks left on glasses and
cutlery
28
7 FAULT DIAGNOSTICS
POSSIBLE CAUSE
Not enough detergent being
used
Not pre rinsing tomato based
soils.
Not enough detergent
Rinse aid dosage too low
Rinse aid level too low
Items removed too soon after
wash
Rinse aid dispenser is low or not
operating
Rinse aid setting too low
Rinse aid empty
Cutlery is not completly
rustproof
Hard water situation
Glasses are not dishwasher
proof
Rinse aid level too low
Incorrect wash cycle for wash
load
Rinse aid empty
WHAT TO DO
Increase detergent based on
soil level
Pre rinse tomato based soils
Increase detergent level based
on soil level
Increase rinse aid level
Increase rinse aid level
Advise to open door at the end
of the wash to aid with drying
Check rinse aid is full, or that
the dispenser is working
Increase rinse aid setting
Fill Rinse aid
Wash cutlery by hand.
Use more detergent
Wash by hand
Increase rinse aid setting
Try a hotter wash cycle
Fill rinse aid
Hide quick links:
Advertisement
Table of Contents
