Skoda Octavia II 2004 Maintenance Manual page 106

Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
– Disconnect the plug from the high-pressure valve for gas
mode -N372- -1-.
– Unscrew the screwed connection of the gas line from the gas
inlet of the filter housing -3-.
– If necessary, slacken both screws -4- and turn the evaporator
-5- until the circlip for the filter housing is accessible.
– Unlock the circlip -2- of the filter housing -1- with right angle
circlip pliers -arrow A-.
– Remove the filter housing -1- from the flange -3- for the evap‐
orator -in direction of arrow B-.
Leave the circlip -2- behind the flange -3-.
– Take out the paper filter -3-.
Note
When removing, installing as well as handling the filter housing
♦
-1-, ensure that the valve core -4- does not fall out of the filter
housing.
If the valve core has fallen out of the filter housing, pay atten‐
♦
tion to the correct fitting position when reinstalling.
The fitting position of the valve core - the tensioning sleeve
♦
points to the valve, the rubber sealing and locking element
points to the paper filter -3-.
Installing
102
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�