Upholstery; Back Upholstery Components - Invacare Top End Eliminator User Manual

7 Upholstery

7.1 Back Upholstery Components

Review the component identification chart below. Some
instructional text will not identify each component. This
chart will serve as identifying components for this procedure
and adjusting the back upholstery procedure.
COMPONENT IDENTIFICATION
ITEM DESCRIPTION
Back Upholstery
A
Hook and Loop Strap
B
Webring
C
Fender
D
Side Panel
E
Rear Upright
F
Back Upholstery Strap
G
Hook
H
Lower Flap
I
Seat Upholstery
J
Cage
K
Loop
L
Small piece of loop (optional) that is used
*L
for a tool kit.
60001470-A
There are three basic attachment points: Hook and
Loop strap at the top, back upholstery strap and
lower flap.
Hook and loop strap at the top of the back upholstery
The hook and loop strap B at top of the back
upholstery A is threaded through an anchor point C
located on each fender D.
The purpose of the hook and loop strap is that
it pulls down on the lower back/ pelvis area to
make sure that when the athlete is in the forward
pushing position they are held inside the chair. The
tightness/looseness is a personal preference to each
individual athlete.
Fig. 7-1
Upholstery
29