Auto Energy Saving Function; Service And Clean - Kohler K-5402T-0 Homeowner's Manual

Auto Energy Saving Function

• Toilet shall auto detect idle hour if energy saving function is ON, and decrease seat heating temp for energy saving
purpose.
Auto energy saving setting refers to Page 51.
•

Service and Clean

A. Regular clean
For best results, keep the following in mind when caring for your KOHLER product:
IMPORTANT! Do not rinse cover directly (include remote).
• Inspection – always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Do not allow cleaners to soak on surface - do not allow cleaners to soak the product.
•
• Do not use abrasive material – use a soft, damp sponge or cotton clothes. Never use an abrasive material
such as a brush or scouring pad to clean surfaces.
• Wipe surface – wipe surfaces clean and rinse completely with water immediately after applying cleanser. Rinse
and dry any overspray that lands on nearby surfaces.
Clean seat
• Do not use abrasive detergent and sterilizing aerosol spray products.
• No corrosive chemical products or cosmetics (such as nail polish or aftershave solution) allowed contacting with
seat to avoid surface damage.
Clean stainless steel beauty parts
• Clean surface with neutral soap water, and then wipe the whole surface off with clean and soft rag. Do not use
cleaners, such as Ammonia, decontamination powder or toilet cleaner which will cause surface damage.
NOTE: disobey these cleaning instructions could void the Kohler warranty.
NOTE: cleaning process success shall be determined by water hardness and temperature, accurate
component quantity, cleaning specification modification.
Note: do not use excessive force when caring cover and seat to prevent product from damage.
Kohler Co.
Caring indication: use detergent and water
mixture or any other detergent listed for seat
cleaning products to clean seat; use a soft,
dampened sponge or cloth. Wipe away and dry
with soft towel, natural dryer seat in the air.
57 1302892-T01-B