Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
Karess 3/4.8L Two-piece Toilet 305mm..................K-5331T-S
Includes Tank.......................................................K-5776T
Includes Bowl.......................................................K-5773T
Includes Quiet-close Toilet Seat.....................K-4141T-2P
Karess 3/4.8L Two-piece Toilet 400mm..................K-5471T-S
Includes Tank.......................................................K-5776T
Includes Bowl.......................................................K-5499T
Includes Quiet-close Toilet Seat.....................K-4141T-2P
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
51mm (2") passageway.
·
Water depth from the rim is 165mm.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305/400mm roughing-in
dimension.
See Fig. #1
·
Closet flange must be 305
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2008).
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
1207474-T01-A
please leave instructions for the
.
/400
mm on-center from wall.
Fig. #1
. The fill valve
VITREOUS CHINA TWO-PIECE TOILET
·
·
·
3/4.8
..................................................................K-5776T
..................................................................K-5773T
3/4.8
..................................................................K-5776T
..................................................................K-5499T
·
·
·
140mm
·
51mm
·
·
305/400mm(
·
·
·
·
2008.
-1-
Karess
INSTALLATION INSTRUCTIONS
S-TRAP 305mm K-5331T-S
S-TRAP 400mm K-5471T-S
305mm ...............................K-5331T-S
.........................K-4141T-2P
400mm ...............................K-5471T-S
.........................K-4141T-2P
165mm
1)
305
/400
mm
1
ASME
Copyright Kohler China Ltd., 2013
-
A112.19.2-
, 2013
Advertisement
Related Manuals for Kohler Karess S-TRAP K-5331T-S
Summary of Contents for Kohler Karess S-TRAP K-5331T-S
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. ·...
-
Page 2: Tools And Materials Required
Reference Value Unit: mm K-5331T-S Finished Wall Front of Bowl 1/2" Supply 1/2" C of Outlet K-5471T-S Finished Wall Front of Bowl 1/2" Supply 1/2" Fig.#1 C of Outlet Kohler reserves the right to change marked dimensions without prior notice. 1207474-T01-A... -
Page 3: Installation
INSTALLATION Position the template on the floor to ensure the template Install the floor mounting. against the wall. Tape in place and drill holes. 1/2" Supply 1/2" 3/8" Anchor Fig.#2 Fig.#3 Position brackts as shown on the template and install. Firmly press the toilet gasket onto the toilet plastic trap outlet. - Page 4 Tighten the nut from above. Install flush valve back to the position. Install the refill tube. Fig.#8 Fig.#9 Connect the supply hose. Apply weight evenly. Carefully insert the outlet into the plastic trap. CAUTION: Turn on the water and allow water to flow through the supply pipe to flush the system of any debris or connecting fill valve.
- Page 5 Caulk silicone around base. Adjust the flush valve cable. CAUTION: Adjust the flush valve cable and refill tube as shown to avoid flush valve cable obstructing the function. Refill tube Caulk Flush valve cable Fig.#14 Fig.#15 Install the push button. Click the button before install the push button.
-
Page 6: Recommended Action
SYMPTOMS RECOMMENDED ACTION 1. Poor flush. A. Adjust the tank water level to match the waterline. B. Fully open the water supply shut-off valve. C. Clear obstructions from the trapway, jet, or bowl rim holes. D. Clear obstructions from the waste line. 2. -
Page 7: Consumer Responsibilities
CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.