Table of Contents
Advertisement
BEFORE YOU BEGIN
BEFORE YOU BEGIN
!
Read installation guide in illustration and word file carefully, and install the tank according to instructions in the guide to avoid
product damage and installation inconvenience caused by inappropriate operation.
!
All data contained is based upon the last product information available at the time of publication. Kohler Company reserves
the right to implement changes of product characteristics, packaging and availability at any time without further notice.
!
Do not apply erosive cleanser and solvent in the tank, which will damage tank spares and result in leakage in the tank.
Kohler will not be responsible for any damage related to above mentioned cleanser or solvent. Mild detergent can be used.
!
Do not apply spares that are not provided by Kohler, and please note that glass adhesive tape shall not be applied to the
installation of Kohler spares. Kohler will not be responsible for any damage related to installation with spares not provided by
Kohler.
!
This product complies with GB26730-2011.
!
Please mount the tank frame on the solid wall and wall thickness should exceed 80mm.
!
During build the front wall of tank, please take protective measure and don't squeeze the tank body directly with concrete,
brick or other hard materials.
!
!
!
!
!
GB26730-2011
!
!
Ordering Information
HYDRO-TOWER 300 PNE IWT(HC,3.0/4.5L)........................................................................................................K-20010T-VLWP
PEBBLE PNEUMATIC IN-WALL TANK FACEPLATE (NOT SUPPLIED) ................................................................K-20341T-PNE
LYNK PNEUMATIC FACEPLATE (NOT SUPPLIED) ...............................................................................................K-75890T-PNE
MODERN LIFE SMALL FACEPLATE (NOT SUPPLIED) .........................................................................................K-23055T-PNE
BEAM SENSOR FACEPLATE (NOT SUPPLIED) .............................................................................................................K-23056T
BEAM SENSOR FACEPLATE (NOT SUPPLIED)..........................................................................................................K-23056TW
300
(
(
(
Function Explanation
!
Anti flow-backwards
!
Adjustment of inlet water level
!
Adjustment of flushing volume
!
Single/double gear
flushing
!
Assemble, disassemble and
maintenance can be done without
tools.
KOHLER CHINA INVESTMENT CO., LTD
1381424-T01-B
3.0/4.5 (
HC) .........................................................................................K-20010T-VLWP
)(
) ........................................................................................................................K-20341T-PNE
)..................................................................................................................................K-75890T-PNE
).........................................................................................................................................K-23055T-PNE
(
) ...................................................................................................................................K-23056T
(
)................................................................................................................................K-23056TW
!
!
!
!
!
JING'AN DISTRICT, SHANGHAI, PRC
(
)
HYDRO-TOWER 300
K-20010T-VLWP/K-20341T-PNE/K-75890T-PNE
80mm
NO.158, JIANG CHANG SAN ROAD,
POST CODE: 200436
158
©
Copyright Kohler China Investment Co., Ltd. 2020
-1-
©
INSTALLATION INSTRUCTIONS
IN-WALL TANK
K-23055T-P E/K-23056T/K-23056TW
N
200436
300
2020
Advertisement
Table of Contents
