Cautions When Setting The Projectors - Panasonic PT-LMZ460 Operating Instructions (Functional Manual)

rProjection in all 360° direction is possible.
360°
360° vertically

Cautions when setting the projectors

f Use the adjustable foot only for the floor standing installation and for adjusting the angle. Using them for other
purposes may damage the projector.
f When installing the projector with a method other than the floor installation using the adjustable foot or the
ceiling installation using the ceiling mount bracket, use the four screw holes for ceiling mount (as shown in the
figure) to fix the projector.
In such case, make sure that there is no clearance between the screw holes for ceiling mount on the projector
bottom and the setting surface by inserting spacers (metallic) between them.
f Use a torque screwdriver or Allen torque wrench to tighten the fixing screws to their specified tightening torques.
Do not use electric screwdrivers or impact screwdrivers.
(Screw diameter: M4, tapping depth inside the projector: 8 mm (5/16"), torque: 1.25 ± 0.2 N·m)
f Do not stack the projectors.
f Do not use the projector supported by its top.
f Do not block the intake and exhaust vents of the projector.
f Avoid heating and cooling air from the air conditioning system directly blow to the intake and exhaust vents of
the projector.
20 - ENGLISH
Chapter 1 Preparation - Precautions for use
360° horizontally
Adjustable foot
Positions of screw holes for ceiling mount
and adjustable foot
360°
(combination of vertical and horizontal)
Screw holes for
ceiling mount (M4)
360°
360° tilted