Parts For Ceiling Mount (Optional); Projected Image And Throw Distance - Panasonic PT-LMZ460 Operating Instructions (Functional Manual)

Parts for ceiling mount (optional)

This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the
ceiling mount bracket for high ceilings or low ceilings.
Model No.: ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKL420B (Projector Mount
Bracket)
f Use only the ceiling mount brackets specified for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualified
technician.

Projected image and throw distance

Install the projector referring to the projected image size, projection distance, etc.
Attention
f Before setting up, read "Precautions for use" (x page 19).
Figure of projected image and throw distance
Note
f This illustration is prepared on the assumption that the projected image size and position have been aligned to fit full in the screen.
f This illustration is not in accurate scale.
L (LW/LT) *
1
SH
SW
H
SD
*1 LW : Minimum distance
LT : Maximum distance
34 - ENGLISH
Chapter 2 Getting Started - Setting up
Projected image
SW
Projection distance
Image height
Image width
Distance from the center of lens to the image lower end
Projected image size
Screen
L (LW/LT)
L (LW/LT)
Screen