[Digital Cinema Reality]; [Dynamic Contrast]; [Off] - Panasonic PT-LMZ460 Operating Instructions (Functional Manual)

[DIGITAL CINEMA REALITY]

When inputting the following signals, it performs cinema processing to improve the vertical resolution and the
image quality.
480/60i, 576/50i, 1080/60i, 1080/50i signals
1) Press as to select [DIGITAL CINEMA REALITY].
2) Press qw or the <ENTER> button.
f The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.

[OFF]

[ON]

[DYNAMIC CONTRAST]

Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
1) Press as to select [DYNAMIC CONTRAST].
2) Press qw or the <ENTER> button.
f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[USER]
Note
f [DYNAMIC CONTRAST] can be adjusted only when there is a signal input. Its settings are effective only when no on-screen display such as
menu screen (OSD) or input guide, a test pattern, or a warning message is displayed.
Setting the light off condition of the light source
1) Press as to select [DYNAMIC CONTRAST].
2) Press qw or the <ENTER> button.
f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3) Press qw to select [USER].
4) Press the <ENTER> button.
f The [DYNAMIC CONTRAST] screen is displayed.
5) Press as to select the item to set.
f The items in the detailed setting will switch each time you press qw.
Setting item
[LIGHTS OUT TIMER]
(Setting of the waiting time
before turning off the light)
[LIGHTS OUT SIGNAL LEVEL]
(Setting of the brightness level
of the signal to turn off the
light)
68 - ENGLISH
Chapter 4 Settings - [PICTURE] menu
Performs no cinema processing.
Performs cinema processing.
Disables the dynamic contrast function.
Adjusts the light source and compensates signals to a small extent.
Adjusts the light source and compensates signals to a large extent.
The light source can be set to turn off when the brightness level of the input image signal falls below a
certain value.
Refer to "Setting the light off condition of the light source" (x page 68) for details.
[DISABLE] Does not turn off the light source.
Turns off the light source when the brightness level of the image signal
being input goes under the value set in [LIGHTS OUT SIGNAL LEVEL].
[0.5s] ~ [10.0s]
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s].
[0.5s] - [4.0s] can be selected in increments of 0.5.
Sets the level of the brightness of the image signal to turn off the light
[0%] ~ [5%] source with [LIGHTS OUT TIMER].
Can be set in increments of 1%. (Factory setting: 0%)
Details