Table of Contents
Advertisement
Diagnosis
Display
F12
Initialization error
when main
microprocessor
is started up for
program
recording
Unsupported
UNSUPPORT
disc error
NO
Disc read error
READ
HARD
Drive error
ERR
Restoration
RECOVER
operation
10.3. The information table of an error generating disk
10.3.1. Error generating disk type
10.3.2. Error generating disk state
Description
Display appears when initialization error is
detected after starting up main
microprocessor for program recording. The
event is saved in memory.
*A disc an unsupported format was played,
even though the drive starts normally.
*The data format is not supported even
though the media type is supported.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, thereis the possibility that
defective Digital P.C.B. / RAM drive.
45
FL display
Remains displayed.
Advertisement
Table of Contents
