Table of Contents
Advertisement
Item
Mode name
Factors which
cause drive error
Disc manufacture ID Display the
Illumination of all FL
/LEDs
S1 signal output
S2 signal output
Front connection
inspection
Tray OPEN/CLOSE
Description
The disc condition is
displayed when an
error occures.
manufacture's ID for a
disc on which a drive
error has occured.
All FL and LEDs are lit
up.
Forcibly superimpose
the S1 signal (5V DC)
on the EE chroma
signal, and check the
output on the S
terminal.
Forcibly superimpose
the S2 signal (2.2V DC)
on the EE chroma
signal, and check the
output on the S
terminal.
Press all the main
unit's buttons and
check the connection
with the Main P.C.B..
The RAM drive tray is
opened and closed
repeatedly.
FL display
40
Key operation
Remote controller key
[4] [4] while in service mode
[4] [5] while in service mode
[5] [1] while in service mode
[5] [2] while in service mode
[5] [3] while in service mode
[5] [4] while in service mode
[9] [1] while in service mode
*Canceling the setting is to do
"forced power-off."
Method:
Press the "POWER" button on
unit more than10 seconds.
Advertisement
Table of Contents
