Table of Contents
Advertisement
Item
Mode name
Audio pattern output The audio pattern
HDD READ
inspection
Laser use time
display
RAM drive last error RAM drive error code
Laser error count
Description
stored in the internal
memory is output
(1kHz-18dB).
Perform a complete
read inspection of the
HDD.
To check laser use
time of drive
display.
*For details about the
drive error code, refer
to the manual for the
specific RAM drive.
The number of times
that a laser error has
occured due to a
defective disc or
defective drive is
counted and displayed.
FL display
Initialization mode
(Interlace)
Audio 44.1kHz / 48kHz
switched.
When the HDD is OK
If the HDD is negative,
the OK section will read
[NG].
39
Key operation
Remote controller key
[2] [3] while in service mode
[2] [4] while in white picture mode
*48k
44k Toggle switched.
[3] [1] in the service mode.
*When canceling the checking
mode while checking, do "forced
power-off".
Method:
Press the "POWER" buttonon
unit more than 10 seconds.
[4] [1] while in service mode
[4] [2] while in service mode
[4] [3] while in service mode
Advertisement
Table of Contents
