020: St.flanger(Stereo Flanger); 021: St.rndm Flang (Stereo Random Flanger) - Korg Karma Parameter Manual

020: St.Flanger
)
(Stereo Flanger
This effect gives a significant swell and movement of pitch to
the sound. It is more effective when applied to a sound with a
lot of harmonics. This is a stereo flanger. You can add spread
to the sound by offsetting the phase of the left and right LFOs
from each other.
Stereo In - Stereo Out
Left
Flanger
Flanger
Right
LFO Phase
LFO: Tri / Sine LFO Shape
LFO Wave (LFO Waveform)
Selects LFO Waveform
a
Shape (LFO Shape)
Determines how much the LFO waveform is changed
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Delay (Delay Time)
e
Sets the delay time from the original sound
Depth
f
Sets the depth of LFO modulation
Feedback
g
Sets the feedback amount
High Damp
h
Sets the feedback damping amount in the high range
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
i (Source)
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: Shape
Changing the LFO waveform shape controls the peak sweep of
flanging effects.
LFO Shape = 0...+100
LFO Waveform=Sine
g: Feedback, i: W/D
The peak shape of the positive and negative "Feedback" value is
different. The harmonics will be emphasized when the effect
sound is mixed with the dry sound if you set a positive value for
Wet / Dry
Feedback
High Damp
Wet / Dry
Tri, Sine
–100...+100
–180...+180deg
Fx:010
0.02...20.00Hz
Fx:009,
Off...Tempo
–20.00...+20.00Hz
Off, On
Fx:009,
MIDI, 40...240
Fx:009
Fx:009
1...16
Fx:009
0.0...50.0ms
0...100
–100...+100
0...100%
–Wet...–1:99, Dry, 1:99...Wet
Fx:010,
Off...Tempo
–100...+100
LFO Shape
LFO Shape = 0...–100
both "Feedback" and "W/D", and if you set a negative value for
both "Feedback" and "W/D".
h: High Damp
This parameter sets the amount of damping of the feedback in the
high range. Increasing the value will cut high-range harmonics.
021: St.Rndm Flang
(Stereo Random Flanger)
The stereo effect uses a step-shape waveform and random
LFO for modulation, creating a unique flanging effect.
Stereo In - Stereo Out
Left
Flanger
Flanger
Right
LFO Phase
LFO: Step-Tri/Random
LFO Wave (LFO Waveform)
a
Selects LFO Waveform
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c Selects the modulation source used for both LFO speed and step
speed
(Amount)
Sets the modulation amount of LFO speed
Step (LFO Step Frequency)
Sets the LFO step speed (speed that changes in steps)
d
(Amount)
Sets the modulation amount of LFO step speed
Delay (Delay Time)
Sets the delay time from the original sound
e
Depth
Sets the depth of LFO modulation
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
f
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Step Base (Step Base Note)
Selects the type of notes to specify the LFO step speed
g
Times
Sets the number of notes to specify the LFO step speed
Feedback
Sets the feedback amount
h
HiDamp (High Damp)
Sets the feedback damping amount in the high range
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
i (Source)
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
Wet / Dry
Feedback
High Damp
Wet / Dry
Step-Tri, Random
Fx:010
–180...+180deg
Fx:010
0.02...20.00Hz
Fx:010,
Off...Tempo
–20.00...+20.00Hz
0.05...50.00Hz
Fx:010,
–50.00...+50.00Hz
0.0...50.0ms
0...100
Off, On
Fx:009,
MIDI, 40...240
Fx:009, 010
Fx:009
1...16
Fx:009
Fx:010,
1...32
Fx:010
–100...+100
Fx:020
0...100%
Fx:020
–Wet...–1:99, Dry, 1:99...Wet
Fx:010, 020,
Off...Tempo
–100...+100
179