Prog 1.1: Play; 1: Program - Korg Karma Parameter Manual

PROG 1.1: Play

In this display page you can select and play programs.
All MIDI data in PROG 1.1: Play is transmitted and
received on the Global MIDI Channel ( GLOBAL 2.1–
1a).
1.1–1: Program
1.1–1a
1.1–1b
1.1–1a: Bank, Program Select, Category, Cat. Hold,
10's Hold, (Tempo)
Bank
This is the program bank display.
Use the BANK [A]–[G] keys to select the bank.
Bank G will cycle as follows each time you press the BANK
[G] key.
G→g(1)→g(2)→g(3)→g(4)→g(5)→g(6)→g(7)→g(8)→g(9)→
g(d)→G
Bank F can be selected if you have installed the sepa-
rately sold EXB-MOSS option. When installed, the 128
special EXB-MOSS programs will be available.
The KARMA series provides rewritable banks A, B, C, D,
and E, each containing 128 programs (total 640). As for non-
rewritable program areas, it provides banks G (capital pro-
grams for GM2), banks g(1)–g(9) (variation programs), and
bank g(d) (drums). (For a list of the factory-set programs,
refer to the separate VNL.)
Bank A, B for preloaded programs
Bank C, D for user programs, and EXB-PCM series programs
Bank E for preloaded programs
Bank F for EXB-MOSS programs
Bank G GM2 capital program
Bank g(1)...g(9) GM2 variation programs*
Bank g(d) GM2 drums program
* For banks with no variation sounds, the GM basic sounds
will be recalled. (An * will be added at the beginning of
the program name.)
2
[Bank A...F, G, g(1)...g(9), g(d)]
Program Select
[(A...F)0...127: name, (G...g(d))1...128: name]
Selects a program.
Choose this parameter, and use the VALUE [
numeric keys [0]–[9], and the [VALUE] dial to select a pro-
gram.
You can select programs by category, or by using "10's
Hold." ( "Category," "Cat. HOLD," "10's HOLD")
Y
ou can transmit MIDI program changes from a con-
nected external MIDI device, or use a foot switch to
select programs. ( p.145 "Foot SW Assign" (GLOBAL
6.1–1a), p.232 "Foot Switch Assign List")
Category
Selects the program category.
All programs are classified into one of sixteen categories.
You can select the desired category, and then choose pro-
grams from that category.
1.1–1c
For the procedure of selecting programs from a category,
refer to "Cat. HOLD" and "Select by Category."
To assign a category to each program, use the "Write
Program" (1.1–1c) dialog box. To change the name of a
category, use "Category Name Prog. 00–07, 08–15"
( GLOBAL 4.1–1/2).
Cat. HOLD (Category Hold)
1 Press the [./HOLD] key to display
gory will be held (fixed).
2 Use "Category" to select the desired category.
3 Choose "Program Select," and use the VALUE [
keys or the [VALUE] dial to select programs sequentially
within the specified category.
4 To cancel, press the [./HOLD] key twice to turn off the
If you press the [./HOLD] key in PROG 1.1: Play, the
selection will cycle in the order of
Select by Category
1 Press the [F8] ("UTILITY") key to access the Utility
menu.
2 Press the [F7] key or the cursor keys [
"Select by Category," and then press the [F8] key. The
Select Program by Category dialog box will appear. The
programs in that category will be shown in the framed list.
3 Select "Cat," and use the Value Controller to choose the
category that includes the program you wish to select.
4 Use the cursor keys [
the list. Alternatively, you can use the [ ], [ ] keys to
select "Index," and use the VALUE [ ], [ ] keys or
[VALUE] dial to make your selection.
5 Press the [F8] ("OK") key to finalize your selection, or
press the [F7] ("Cancel") key to cancel your selection.
10's HOLD
1 Press the [./HOLD] key to display
The first digit of the program number will be held (fixed).
display.
→ Cancel.
], [ ] to select a program from
], [ ] keys,
[00...15: Name]
. The cate-
], [ ]
→
], [ ] to choose
.