6: Preference; 7: K.rtc (Karma Rtc) - Korg Karma Parameter Manual

Volume
Sets the volume of each track (channel) 1–16.
Tracks whose "Status" (3.1–1(2)a) is INT or BTH can
receive MIDI control change (CC) #7 to control the vol-
ume. The actual volume of a track is determined by
multiplying the MIDI volume (CC#7) and expression
(CC#11) values. Tracks 1–16 will be controlled by MIDI
channels 1–16 respectively.
1.1–4(5)b: UTILITY
I
"GM Initialize" (1.1–1b), "Solo Selected Track," "Load
Template Song," "Save Template Song," "Set Location"
(SEQ 1.1–1d)
1.1–6: Preference
Here you can make settings for playing SMF files consecu-
tively, and make settings for the metronome.
1.1–6a
1.1–6a: Preference
Next File:
Specifies whether or not the next file will be played back in
succession when the currently selected SMF finishes play-
ing.
Chain to next file
On (checked): When the currently selected file finishes play-
ing, the next file will automatically be selected.
Auto Start
On (checked): When the currently selected SMF finishes
playing, the next file will automatically begin playing. This
is valid when "Chain to next file" is checked.
Metronome:
Indicates settings for the metronome.
Sound (Metronome Sound)
On (checked): The metronome will sound during playback.
The sound of the metronome will be output to the bus
selected by "BUS Select."
Level
Set the volume of the metronome.
BUS (BUS Select)
Specify the output destination of the metronome sound
( SEQ 1.1–6b).
1.1–6b: UTILITY
I
"GM Initialize" (1.1–1b), "Solo Selected Track," "Load
Template Song," "Save Template Song," "Set Location"
(SEQ 1.1–1d)
118
[0...127]
1.1–6b
[Off, On]
[Off, On]
[Off, On]
[000...127]
[L/R, L, R, 1, 2, 1/2]
1.1–7: K.RTC
(KARMA RTC)
1.1–7a
1.1–7a: RTC Parameter
This displays the names of the KARMA Real-time Controls
knobs and switches, and the knob and switch settings for
Song Play mode.
The [---] area preceding the name of each knob or switch
shows the abbreviated name of the category of the program
selected by the track played by the KARMA module con-
trolled by that knob or switch. In the case of multiple tracks
with programs of differing categories, this will indicate
[MLTI].
Parameter assignments can be made in the S.PLAY 6.3:
KARMA GE: Parm page (6.3–1(2)(3)(4)) and the S.PLAY 6.4:
KARMA RT, RTPrm page (6.4–1(2)).
The name can be edited in the S.PLAY 6.4–4/5: KARMA RT,
Name 1/2 page.
The SCENE [1]/[2] switches allow you to make two sets of
settings for the KARMA Real-time Controls knobs and
switches. The knob and switch settings displayed here will
also change according to the SCENE 1/2 setting.
Graphic display of knobs and switches
When you operate a knob or switch to modify the setting it
originally had when you entered Song Play mode, the
graphic display of the knob or switch will be highlighted in
black.
When you return the knob or switch to the setting it origi-
nally had when you entered Song Play mode, the display
will return to the previous state.
This provides a convenient way for you to return to the orig-
inal state after you have operated a knob or switch.
Song Play mode has a different structure than a pro-
gram or combination, and a different reference value is
used to highlight the knob or switch graphic. In the case
of a program or combination, the knob or switch value
that is written will be the reference value. However in
Song Play mode, the settings at the moment you
entered the mode will be the reference value. (When
you enter the mode, the settings will be as they were
last edited when you exited the mode.) The operation is
as described below.
1.1–7b