Icom IC-7100 Instruction Manual page 85

Call sign (AI sec. 9)
RX History (AI sec. 9)
MY Station (Section 4)
NOTE: The default settings shown below in bold are for the USA version.
The default settings may differ, depending on your transceiver version.
<<REC Start>>*
Play Files*
Recorder Set
REC Mode
RX REC Condition
File Split
PTT Auto REC
Player Set
Skip Time
DV Auto Reply*
* Be sure to insert the SD card into the transceiver before selecting these items.
In this item, set infrequently changed values or functions in the DV mode.
Standby Beep
Auto Reply
DV Data TX
Digital Monitor
Digital Repeater Set
RX Call Sign Write
RX Repeater Write
DV Auto Detect
RX Record (RPT)
BK
EMR
EMR AF Level
GPS (AI sec. 10)
SD Card (AI sec. 13)
In this item, set the TX/RX voice recording options.
TX&RX or RX Only
Always or
OFF or ON
OFF or ON
3sec, 5sec, or 30sec
OFF, ON or ON (to me: High Tone)
OFF, ON or Voice
PTT or
, Digital or Analog
OFF or ON
OFF or Auto
OFF or Auto
OFF or ON
ALL or Latest Only
OFF or ON
OFF or ON
Starts recording the TX/RX audio.
Selects to playback or delete the recorded audio.
Selects to record the TX audio or not.
Selects whether or not the squelch status affects
the RX voice audio recording.
Selects whether or not to automatically create
a new file after each transmission, reception, or
each time the squelch opens or closes. Even if
the squelch is closed, a new file is created when
the "RX REC Condition" item is set to "Squelch
Auto."
Turns the PTT Automatic Recording function ON
or OFF.
Sets the Skip time to rewind or forward the re-
corded audio when you push the fast-rewind or
fast-forward key during playback.
Records a voice audio to use for the Auto Reply
function in the DV mode.
Selects whether or not to sound a beep after a
received signal disappears.
Selects whether or not to automatically reply to a
call addressed to your own call sign.
Selects to manually or automatically transmit low
speed data.
Selects the DV mode RX monitoring when [XFC]
is held down.
Turns the digital repeater setting function ON or
OFF. This function is usable in any DV mode ex-
cept the DR mode.
Turns the RX call sign automatic write function
ON or OFF. This function is usable in any DV
mode except the DR mode.
Turns the repeater call sign automatic write func-
tion ON or OFF. This function is usable in any DV
mode except the DR mode.
Turns the DV mode automatic detect function ON
or OFF.
Selects whether to record all calls or only the lat-
est call, when the received signal includes a sta-
from the access repeater.
Turns the BK (Break-in) function ON or OFF.
The BK function allows you to break into a con-
versation between two stations with call sign
squelch enabled.
Turns the EMR (Enhanced Monitor Request)
communication mode ON or OFF.
Sets the audio output level when an EMR mode
signal is received.
6-3
6
SET MODE