Function Icons - Icom IC-7100 Instruction Manual

!9 FUNCTION ICONS

"VOX" appears when the VOX function is activat-
ed. (AI sec. 6)
The Break-in icons appear when the Break-in
function is turned ON. (AI sec. 6)
turned ON.
turned ON.
The Preamp icons appear when a preamplifier is
turned ON. (AI sec. 5)
"P.AMP1" or "P.AMP2" is displayed when preamp 1
or preamp 2 is ON.
played when the preamp is ON.
"ATT" appears when the Attenuator function is
turned ON. (AI sec. 5)
The AGC icons display the selected AGC time
constant. (AI sec. 5)
for AGC slow; "AGC-OFF" for AGC OFF.
is fixed.
"DUP+" appears when plus duplex, "DUP –" ap-
pears when minus duplex (repeater) operation is
selected. (AI sec. 4)
"RIT" and the shift frequency are displayed when
the RIT function is turned ON. (AI sec. 5)
" " appears when the Speech Compressor
function is turned ON.
" " appears when the Noise Blanker function is
turned ON. (AI sec. 5)
" " appears when the Noise Reduction function
is turned ON. (AI sec. 5)
The Notch icons appear when the Notch filter
function is turned ON. (AI sec. 5)
• " " appears when the Manual Notch function is
turned ON.
• " " appears when the Automatic Notch function is
turned ON.
" " appears when priority scan is turned ON.
(AI sec. 12)
" " appears when the VSC (Voice Squelch
Control) function is turned ON.
" " appears when the EMR (Enhanced Moni-
tor Receive) communication mode is selected. (AI
sec. 9)
is necessary when operating in the DV mode.
" " b
links when receiving an EMR signal.
" " appears when the BK (Break-in) function is
turned ON. (AI sec. 9)
The BK function allows you to break into a conversa-
tion where the two other stations are communicating
with call sign squelch enabled.
" "
blinks when receiving a break-in call.
-
1-9
PANEL DESCRIPTION
1