Icom IC-7100 Instruction Manual page 47

Setting frequency (Continued)
D
Programming the user band edge (Continued)
Enter the "User Band Edge" screen.
q
Function > User Band Edge
(C) >
SET
Touch for 1 second the Band edge that you want to
w
insert a new Band edge above it.
[Z](D) one or more times to select the page.
Touch "Insert."
e
Touch desired numbers to edit the lower edge fre-
r
quency, and then touch [ENT](D).
same frequency as lower frequency is automatically in-
put.
t u](D) to toggle the lower or upper frequency
entry.
f] or [g](D) to move the cursor left or right.
(C) to insert a blank field.
MENU
Touch desired numbers to edit the upper edge fre-
t
quency, and then touch [ENT](D).
Touch [ ](D) or push
y
"Function" Set screen.
Enter the "User Band Edge" screen.
q
Function > User Band Edge
(C) >
SET
Touch a blanked field.
w
[Z](D) one or more times to select the page.
Touch desired numbers to edit the lower edge fre-
e
quency, and then touch [ENT](D).
same frequency as lower frequency is automatically in-
put.
t u](D) to toggle the lower or upper frequency
entry.
f] or [g](D) to move the cursor left or right.
Touch desired numbers to edit the upper edge fre-
r
quency, and then touch [ENT](D).
Touch [ ](D) or push
t
"Function" Set screen.
The L, R, C or D in the instructions indicate the
part of the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch screen)
Y] or
](D) or push
(C) to return to the
MENU
Y] or
(C) to return to the
MENU
Example: Inserts the 1.800–1.999999 MHz range
Enter the decimal point
Move the cursor
3-15
BASIC OPERATION
Touch the Band
edge for 1 sec-
ond
Touch "Insert"
Move the cursor
Selects upper or
lower edges
Enter
Cancel edit
Delete entering
Edit the lower
edge frequency,
then touch [ENT]
Same frequency as lower fre-
quency is automatically input
Edit the upper
edge frequency,
then touch [ENT]
3