Icom IC-7100 Instruction Manual page 69

Your access repeater must be set to "FROM" when you
transmit a call in the DR mode.
You have four ways to set the access repeater.
Click the title shown below to jump to the specified
page.
Select the preset repeater by rotating the Dial or [M-CH]
Or, rotating [BANK] (L) selects the repeater group.
When your access repeater is preloaded in your trans-
ceiver's repeater list, you can select it by selecting the
repeater area or name.
Searches for DV signals from a repeater or a
simplex frequency.
Searches for the nearest repeater by using your own
and the repeater's location.
The nearest repeaters in your transceiver's repeater
list are displayed as the available choices.
Select a repeater that you have accessed before, from
the TX History record.
"Hirano" repeater
is set in "FROM."
(L) on the DR mode screen.
Blinks
While DR mode scanning
5-7
D-STAR OPERATION <BASIC>
DR mode screen
5