Icom IC-7100 Instruction Manual page 41

Setting frequency (Continued)
D
' '
cy can be changed in the selected 'kHz' steps. The
steps can be memorized, depending on the operating
modes.
On the Mode selection screen, select the desired op-
q
erating mode. (p. 3-17)
Touch the kHz digits for 1 second to enter the Tuning
w
step selection screen.
the "Z" icon is displayed.
Touch the desired tuning step to
e
'kHz' step.
selectable.
to select the page.
also selects the tuning step.
](D) or push
the normal operating screen.
Repeat steps q to e
r
steps for other modes.
D
You can change the frequency in 1 Hz steps for fine
tuning.
Touch the Hz digits for 1 second to turn the 1 Hz tun-
ing step ON or OFF.
NOTE:
tuning steps.
[UP]/[DN] switches of the microphone are used for
frequency tuning (if the quick tuning function is not
selected.)
-
select the desired
Y] or [Z](D)
MENU (C) to return to
3-9
L eft D isplay R ight
C enter
BASIC OPERATION
Touch the kHz dig-
its for 1 second
Selects pages
Cancel edit
The L, R, C or D in the in-
structions indicate the part
of the controller.
L: Left side
R: Right side
C: Center bottom
D: Display (Touch screen)
Touch the Hz dig-
its for 1 second
1 Hz indication
3