Table of Contents
Advertisement
1. Mark the mounting holes on the ceiling,
using the removed camera mounting base
as a template.
2. Fix the camera mounting base to the ceiling
with four screws (not provided, M4).
3. Hook the fall prevention wire on the camera
mounting base.
Be sure to match the wire with the fall
prevention wire fixing angle as shown below.
Ring of the
fall prevention
wire
33
Marking
Fall prevention
wire fixing angle
Cautions:
• Use the supplied dust protection sheet if the
camera mounting base is liable to be
exposed to a dusty atmosphere. Remove the
cover from the dust protection sheet, then
stick the sheet on the camera mounting
base.
• Remove the sheet before mounting the cam-
era on the base.
• While the camera is separated from the
base, keep the camera in the supplied poly-
ethylene sack.
4. Mount the camera on the camera mounting
base and rotate the camera clockwise.
15°
Advertisement
Table of Contents
