Setting Procedures; Menu Display - Panasonic WV-CS320 Operating Instructions Manual

SETTING PROCEDURES

The following setting procedures are described on the assumption that this model is used in combination
with the WJ-SX550C Matrix Switcher and WV-CU550CJ System Controller. In case a controller other than
the WV-CU550CJ is used, refer to the table on page 10.

Menu Display

Setup Menu Display
WV-CU550CJ
1. Select the camera number you want to set up and a monitor to
display SET UP MENU.
2. Display the D4 menu on the LCD by pressing the appropriate cur-
sor buttons.
3. Press the F1 button.
SET UP MENU appears on the monitor screen.
4. To close SET UP MENU, press the F4 button.
WV-CU360C
Press the CAM SETUP key while holding down the SHIFT key to
open the SETUP menu.
WV-CU161C
Press the CAMERA SETUP key for 2 seconds or more to open the
SETUP menu.
WV-RM70
1. Turn the MODE SELECTION switch to NORMAL or ALARM OFF.
2. Press the PROG switch for 2 seconds or more to open the
Program Menu.
3. Move the cursor to Camera Set Up Menu, and press the SET
switch to open the SETUP MENU.
Submenu Display
The items marked O can be selected/changed on the submenu.
• Move the cursor to an item with the O mark and press the CAM
(SET) key. The submenu appears.
14
D4 menu
Camera Set Up Menu
On Exit
F2 F3 F4
F1
Camera Set Up Menu
Res A.Res Exit
F1 F2 F3 F4
Setup menu
** SET UP MENU **
O
PRESET 1
O
MAP
HOME POSITION OFF
SELF RETURN OFF
AUTO MODE OFF
FLIP-A-CHIP OFF
CLEANING OFF
IMAGE HOLD OFF
O
CAMERA