Rejecting/accepting a non-registered Bluetooth device
When Bluetooth is enabled or Visibility is activated, the handset is only visible to other Bluetooth
devices for 5 minutes (
Also, a connection can only be established when a register process is started.
Start a register process as described in Section Registering Bluetooth devices.
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
Bluetooth
address are shown
Additional functions using the PC interface
The Gigaset QuickSync program has been installed on the computer.
Free to download at
QuickSync functions:
•
Synchronise the contact details of the handset with Microsoft® Outlook® or a Google™
account
•
Download from the PC to the handset images for the CLIP display in the directory and for the
screensaver
•
Download audio files for ringtone melodies from the PC to the handset
•
Initiate, take or reject phone calls on the PC
•
Update firmware
•
Save and restore the handset settings on the PC
For detailed information on all functions:
Registering handset with QuickSync
Connecting the handset to the computer via Bluetooth or via a USB data cable.
Connect the handset directly to the PC and not via a USB hub.
Data transfer using Bluetooth:
•
The computer has Bluetooth capability.
•
A USB data cable is not plugged in. If a USB data cable is plugged in during an
existing Bluetooth connection, the Bluetooth connection is interrupted.
Start the Gigaset QuickSync program on the PC
program are displayed
p. 45). A device is only able to request a connection during this time.
OK
Own Device
Change
change the name
www.gigaset.com/quicksync
Gigaset QuickSync help system
Select handset
Additional functions using the PC interface
OK . . . the name and the device
Save
Add device . . . All devices detected by the
47