Additional functions using the PC interface
Rejecting/accepting a non-registered Bluetooth device
If a Bluetooth device that is not registered in the list of known devices tries to connect to the
handset, a prompt will appear asking you to enter the PIN of the Bluetooth device (Bonding).
Reject:
Accept:
Changing the Bluetooth name of the handset
The handset is shown by this name on another Bluetooth device.
. . . use
the device address are shown
Additional functions using the PC interface
The Gigaset QuickSync program has been installed on the computer.
Free to download at
QuickSync functions:
•
Sync the handset's directory with Microsoft® Outlook®
•
Upload CLIP-pictures (.bmp) from the computer to the handset
•
Upload pictures (.bmp) as screensavers from the computer to the handset
•
Upload sounds (ringtone melodies) from the computer to the handset
•
Update firmware
•
Cloud synchronisation with Google™
Connecting the handset to the computer via Bluetooth or via a USB data cable.
Connect the handset directly to the PC and not via a USB hub.
Transferring data
Data transfer using Bluetooth:
•
The computer has Bluetooth capability.
•
A USB data cable is not plugged in. If a USB data cable is plugged in during an
existing Bluetooth connection, the Bluetooth connection is interrupted.
44
Briefly press the End call key
. . . use
to enter the PIN of the Bluetooth device to be
accepted
OK
Add the device to the list of known devices:
use the device temporarily:
used, as long as the device is located within transmission range or until
it is switched off
to select
Bluetooth
Change
www.gigaset.com/quicksync
Availability and operation of the functions
may differ on your telephone.
. . . Wait for PIN confirmation . . . then
No . . . the Bluetooth connection can be
OK
Own Device
. . . use
to change the name
Yes
OK . . . the name and
Save